Optelec ClearReader + Bedienungsanleitung Seite 60

Optelec
Recommended separation distances between portable and mobile RF communications
equipment and the ClearReader
+
The ClearReader is intended for use in the electromagnetic environment specified below. When
usingthe ClearReader
Rated maximum
output power of
transmitter W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in metres (m) can be estimated using the equation applicable to the
frequency of the transmitter, where P is the maximum output power rating of the transmitter in
watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range
applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
59
+
+
, make sure the ClearReader
Separation distance according to frequency of transmitter m
150 kHz to 80 MHz
P
d = 1,2
0,12
0,38
1,2
3,8
12
+
is being used in the environment described below.
80 MHz to 800 MHz
P
d = 1,2
0,12
0,38
1,2
3,8
12
ClearReader
800 MHz to 2,5 GHz
d = 2,3 P
0,23
0,73
2,3
7,3
23
English
+