Page Mode; Column Mode; Line Mode; Overview - Optelec ClearReader + Bedienungsanleitung

+
Optelec ClearReader
Modes: Column, Line, Page high contrast, Page full color and overview mode. To switch between
the different Modes, press the Mode button on the Magnification Feature Pack.
To set the default viewing mode and options adjust the appearance of the text such as size, color,
+
word highlight, or font can be found within the ClearReader Menu.

4.4. Page Mode

The Page Mode shows a photograph of the document in its original layout, including the pictures.
There are 2 Page modes, the high contrast Page mode and full color Page mode. In the high
contrast Page mode the text is displayed in the selected high contrast colors.

4.5. Column mode

In the Column mode the text is reformatted and displayed in a column to fit the width of the screen
regardless of the text size. Pictures are not shown in this mode.

4.6. Line mode

In Line mode the text is reformatted and displayed in one continuous line, and the highlighted word
is always displayed at the centre of the screen. Pictures are not shown in this mode.

4.7. Overview

In the Full page overview, the full page is being shown with blue numbered bullets marking the
detected text zones in the document. The navigation bullets can be used to quickly navigate
through a text. Navigate between the bullets by pressing the Play / Pause button plus the Up
35 English