The Most Important Codes For Commissioning - Lenze 8200 motec Montageanleitung

7
Commissioning

The most important codes for commissioning

)
Note!
The following table describes in detail the codes mentioned in
l
the examples for commissioning!
Do not change codes, the meaning of which is unknown to
l
you! All codes are described in detail in the System Manual.
How to read the code table
Column Abbreviation
Code Cxxxx
1
2
*
v
s
(A)
uSEr
Name
Lenze
à
Selection 1
IMPORTANT −
112
Meaning
Code Cxxxx
Subcode 1 of Cxxxx
Subcode 2 of Cxxxx
Parameter value of the code is the same in all parameter sets
Keypad E82ZBC
Keypad XT
EMZ9371BC
Keypad E82ZBC
Keypad XT
EMZ9371BC
Code, subcode or selection are only available when using an
Application−I/O
With Lenze setting the code is available in the USER−menu
Name of the code
Lenze setting (default setting/value set under C0002)
Further information can be obtained from "IMPORTANT"
{%} 99 Min. value
Brief, important explanations
EDK82MV222 DE/EN/FR 8.0
The parameter value of a code can be
l
different in every parameter set.
Parameter value accepted immediately
l
(ONLINE)
Changed parameters will be accepted after
pressing v
Changed parameters will be accepted after
pressing T V
Changed parameters will be accepted after
pressing v if the controller is inhibited
Changed parameters will be accepted after
pressing T V if the controller is inhibited
{unit} Max. value
L