Bpt TH400TX-RX Gebrauchsanweisung Seite 15

the indicator round to the 1
(Monday) position, figure 36.
7.3 - Using the 0÷23
tons, move the flashing bar
0 hours on the daily program
graph, figure 37.
Note. When you move away from
the actual time, the information on
the display changes as follows:
a) The clock shows the time indica-
ted by the flashing of the bar
The dots between the hours and
minutes stop flashing.
b) The temperature reading shows
the value of the temperature level
selected for the time indicated by
the flashing bar.
7.4 - Using the or
figure 38, select the required tem-
perature level; then press the
1 2 3 4 5 6 7
ON
T3
T2
T1
0 4 8 12 16 20
1 2 3 4 5 6 7 ON
T3
T2
T1
0 4 8 12 16 20
0÷23 button to move on to the
next hour and select the required
but-
temperature, figure 39. Proceed in
to
this way until you reach 23.00
hours. This completes the pro-
gram for Monday.
7.5 - If, for the next day or for the
remainder of the week, you want to
maintain the same program, press
the C button, figure 40, to automa-
.
tically copy the program for the
days progressively indicated by the
corresponding bar.
7.6 - To program the subsequent
days differently, move to the next
day by means of the 1÷7 button
and repeat the same procedure as
button,
described in step 7.4, figure 41.
7.7 - Having completed the pro-
gramming sequence, you can
1 2 3 4 5 6 7
0
23
1
7
T3
T2
T1
C
0 4 8 12 16
Fig. 36
1 2 3 4 5 6 7
0
23
1
7
T3
T2
T1
C
0 4 8 12 16
Fig. 37
return immediately to the current
day and time by pressing the
button; otherwise, the thermostat
returns automatically to normal
after an interval of 10 s from the
last action you take, figure 42.
All programming operations can
be performed at any time, at will.
7.8 - Close the front panel on the
thermostat.
1 2 3 4 5 6 7
T3
T2
T1
0
1 2 3 4 5 6 7
ON
0
23
1
7
T3
T2
T1
C
20 0
Fig. 38
ON
R
0
23
1
T
7
C
20
Fig. 39
ON
4 8 12 16 20
Fig. 40
ON
4 8 12 16 20
Fig. 41
1 2 3 4 5 6 7 ON
T3
T2
T1
0 4 8 12 16 20
Fig. 42
GB
1
0
23
1
7
C
0
23
1
7
C
15