Standard Programs In Permanent Memory; Manual Operation - Bpt Th400Tx-Rx Gebrauchsanweisung

the first 5 s, then progress more
rapidly.
1
3 - STANDARD PROGRAMS
IN PERMANENT MEMORY
3.1 - HEATING PROGRAM
To facilitate the user, the THERMO-
PROGRAM is provided with a per-
manently-memorized heating pro-
gram which maintains the tempe-
rature conditions as illustrated in
figure 21 from Monday to Friday
1 2 3 4 5 6 7
R
T
T3
T2
T1
0 4 8 12
1 2 3 4 5 6 7
T3
T2
T1
0 4 8 12
1 2 3 4 5 6 7
T3
T2
T1
0 4 8 12
12
GB
(1÷5) and as illustrated in figure 22
from Saturday to Sunday (6 and
7), in which the temperature levels
are set as follows:
T1 16 °C
T2 18 °C
T3 20 °C
3.2 - COOLING PROGRAM
The permanently-memorized coo-
ling program maintains the tempe-
rature conditions illustrated in figu-
re 23, where the temperature levels
are set as follows:
T1 24 °C
ON
T2 26 °C
T3 28 °C
If the permanently-stored pro-
16 20
grams coincide with your needs,
Fig. 20 the THERMOPROGRAM needs no
ON
1 2 3 4 5 6 7
T3
T2
T1
16 20 0
Fig. 21
ON
R
T
16 20
Fig. 22
ON
4 8 12 16 20
Fig. 23
1 2 3 4 5 6 7 ON
T3
T2
T1
0 4 8 12 16 20
Fig. 24
further explanation and is ready to
operate immediately.
To create personalized programs,
on the other hand, proceed as
explained in paragraphs 5, 6 and 7.

4 - MANUAL OPERATION

If you temporarily want a different
temperature without interfering
with the program settings, you can
switch to MANUAL mode by pres-
sing the button, figure 24.
The program graph on the display
is canceled and the temperature
reading refers to the previously-set
temperature, which can be varied
at will by means of the
button (the thermostat is despat-
ched with a default temperature
value of 20 °C), figure 25.
1 2 3 4 5 6 7
ON
R
T
T3
T2
T1
0 4 8 12 16 20
1 2 3 4 5 6 7 ON
R
T
T3
T2
T1
0 4 8 12 16 20
or
Fig. 25
Fig. 26