Wild Card Program - Bpt Th400Tx-Rx Gebrauchsanweisung

8 - WILD CARD PROGRAM

The thermostat is also provided
1
with a WILD CARD program (for
use, for instance, during mid-week
breaks, holidays, plant repairs,
etc.) which can be enabled at any
time of day and remain enabled for
the rest of the day, or it can be
booked in advance for any day of
the week. The program stored in
the thermostat's permanent me-
mory is the same as the Sunday
(7) program, but it can be perso-
nalized.
To access this program for the cur-
rent day, proceed as follows:
8.1 - Make sure that the thermo-
stat is in AUTOMATIC mode.
8.2 - Press the
43.
1 2 3 4 5 6 7
R
T
T3
T2
T1
0 4 8 12
1 2 3 4 5 6 7
R
T
T3
T2
T1
0 4 8 12
16
GB
The bar under the
enabled to confirm that the WILD
CARD program has been selected.
8.3 - Proceed with personalizing
the program as required as descri-
bed in paragraphs 5, 6 and 7
(steps 7.2, 7.5 and 7.6 do not
apply in this case).
At midnight, THERMOPROGRAM
returns to automatic mode.
8.4 - To abandon the WILD CARD
program and restore the thermostat
to AUTOMATIC mode, press the
button again, figure 44. If you want
to book the WILD CARD program
for another day, proceed as follows:
8.5 - Open the front panel on the
thermostat.
8.6 - Make sure that the thermo-
button, figure
stat is in AUTOMATIC mode.
1 2 3 4 5 6 7
ON
T3
T2
T1
16 20 0 4
Fig. 43
ON 1 2 3 4 5 6 7
T3
T2
T1
16 20 0 4
Fig. 44
symbol is
ON
8 12 16 20
Fig. 45
ON
8 12 16 20
Fig. 46
8.7 - Using the 1÷7 button, bring
the indicator into line with the day
you need, figure 45.
8.8 - Press the
46.
The bar under the
enabled to confirm that the pro-
gram concerns this particular day.
8.9 - Proceed with personalizing
the program as required.
8.10 - Press the
restore the thermostat to AUTO-
MATIC mode, figure 47.
The program will automatically
come on at 0.00 hours of the
selected day.
You can cancel a booking by retur-
ning the indicator to the day con-
cerned by means of the 1÷7 button
and then pressing the
1 2 3 4 5 6 7
ON
0
23
1
7
T3
T2
T1
C
0 4 8 12 16 20
1 2 3 4 5 6 7 ON
0
23
1
7
T3
T2
T1
C
0 4 8 12 16 20
button, figure
symbol is
button to
button.
0
23
1
7
C
Fig. 47
0
23
1
7
C
Fig. 48