Bpt TH400TX-RX Gebrauchsanweisung Seite 13

After about 5 s since the last ope-
ration, the display returns to indi-
cating the room temperature.
You can check the temperature
setting at any time by pressing the
button twice.
In MANUAL mode, you can select
any temperature between 2 °C and
35 °C and this will be kept constant
until you input a new setting or
change to another operating mode.
TIMER-CONTROLLED
MANUAL OPERATION
The TIMER-CONTROLLED MA-
NUAL mode is suitable for use if
you want to set a temperature for
several hours or days (e.g., to keep
a comfortable temperature for lon-
ger when visitors arrive, or to eco-
1 2 3 4 5 6 7
R ON
T
T3
T2
T1
0 4 8 12 16 20
1 2 3 4 5 6 7 ON
R
T
T3
T2
T1
0 4 8 12 16 20
nomize while away for lengthy
periods).
Once you have set the required
time, the counter begins a count-
down, at the end of which the ther-
mostat switches from MANUAL to
AUTOMATIC mode, running the
system according to the pre-set
program.
Programming in hours
4.1 - Make sure that you are in
MANUAL mode.
4.2 - Set the value of the required
temperature by pressing
4.3 - Press the
figure 26.
The display shows the wording
h01 instead of the actual time.
4.4 - Press the button
until you reach the number of
1 2 3 4 5 6 7
R
T
T3
T2
T1
0 4 8
Fig. 27
1 2 3 4 5 6 7
R
T
T3
T2
T1
0 4 8
Fig. 28
hours required, which can range
from 1 to 99, figure 27.
The hours are counted including the
hour during which the program-
ming option is used (so the remain-
der of the hour when the setting is
made counts as a whole hour).
Note. To return to AUTOMATIC
mode before the expiry of the pro-
grammed interval, press the
button, figure 28.
Programming in days
4.5 - Make sure that you are in
or .
MANUAL mode.
button once,
4.6 - Set the value of the required
temperature by pressing
4.7 - Press the
figure 29.
or
The display shows the wording
d01 instead of the actual time.
4.8 - Press the button
until you reach the number of days
required, which can range from 1
ON
to 99.
The days are counted including the
day during which the program-
12 16 20
ming option is used (so the
remainder of the day when the set-
Fig. 29
ON
R
T
12 16 20
Fig. 30
or
button twice,
or
1 2 3 4 5 6 7 ON
T3
T2
T1
0 4 8 12 16 20
Fig. 31
GB
1
.
13