Pari SINUS Gebrauchsanweisung Seite 85

• Place the filter changer on the
filter.
Twist and the filter will slide out
of the compressor housing
without difficulty.
Info: The filter changer is in-
cluded with the nebuliser.
• Position the new air filter with the hole in front and press it
as far as possible against the right, cross-shaped adapter.
• Unscrew the filter holder from
your compressor using a suit-
able coin.
• Pull the old filter out of the filter
holder and fit the new filter in
its place.
• Reinsert the filter holder together with the new filter in your
compressor and screw it tight with the coin.
Repairing
The compressor must only be serviced by the PARI GmbH
Technical Service department or a service centre expressly au-
thorised by PARI. If the compressor is opened or manipulated
by anyone else, all claims under the warranty shall be void. In
these cases, PARI GmbH will also accept no liability.
– 85 –