NOTICE
Danger of device fault caused by falling
If the compressor falls, it may be damaged so badly inside
and outside that it is no longer usable.
• Place the compressor on a firm, flat, dry surface. A soft
base such as a sofa, a bed or tablecloth is not suitable.
NOTICE
Danger of device fault caused by dust
If the device is operated in a very dusty atmosphere, more
dust may collect inside the housing and cause a fault in the
device .
• Do not operate the compressor on the floor, under the bed
or in workshops.
• Only operate the compressor in a low-dust environment.
The room in which the compressor is operated must satisfy
certain conditions [see: Operation, page 97]. The compressor
is not intended for outdoor use.
• Connect the power cord to the
power cord socket of the com-
pressor.
• Plug the power plug into a suit-
able socket.
– 70 –