Direct Mounting Method; Torque Arm Mounted To Customer's Machine; Torque Arm Tie-Rod Type (Option); Buddybox To Be Secured To Driven Shaft - Sumitomo BUDDYBOX Betriebsanleitung

B U D D Y B O X O p e r a t i n g M a n u a l

5.5.1 Direct mounting method

Hole in casing. Use two bolts.
Hole in casing. Use two bolts.

5.5.4 Buddybox to be secured to driven shaft

5.5.4.1 How to secure Buddybox not to move to the machine side

secured by staged shaft

5.5.4.2 How to secure Buddybox not to move off from the machine side

snap ring
secured by spacer and a
snap ring
BB_D_GB_09_06 NO. 991002

5.5.2 Torque arm mounted to customer's machine

The shaded section schould be prepared by the customer

5.5.3 Torque arm Tie-rod type (option)

spacer
bearing unit
secured by spacer(stageless
driven schaft)
spacer spacer
secured by an end plate and
tightening screw
Issue:
set screw stopper ring
secured by a set screw and a stopper
set screw
secured by a set screw and a stopper
09/2006
stopper
Page 5