Faults With Display; Faults - Kärcher BD 40/12 C Bedienungsanleitung

 Reattach the wastewater tank to the ap-
pliance.
 Conect the suction hose with the waste-
water reservoir.
Warning
Charge the battery before commissioning
the machine.
The battery status indicator shows the fol-
lowing faults:
X 1
X 1
X 1
X 1 No disc brush inserted in cleaning
1 = lights up, X = blinks
Different segments of the battery status indicators are
blinking.
24

Faults with display

Fault
Power consumption of suction tur-
bine is too high
Power consumption the brush drive
is too high
Suction turbine cable break.
head.
Power consumption of the brush
drive is too low.
Brush drivee cable break.
Danger
Risk of injury. Before carrying out any tasks
on the device, switch off the button for
brush operations and suction turbine and
pull out the charger plug.
Warning
Risk of damage to the appliance on ac-
count of water leakage. Drain out dirt water
and the remaining free water before work-
ing at the machine.
In case of faults that cannot be remedied
using the table below please contact the
customer service.
Remedy
Turn off the switch for the brush op-
eration; wait briefly and switch it
back on. If the fault recurs, call cus-
tomer service.
Turn off the switch for the brush op-
eration; release the handle switch
and switch the brush drive switch
back on.
– 9
EN

Faults