Memory Display - ROBBE Power Peak Twin EQ-BID Bedienungsanleitung

ESC
5.5 MEMORy VIEw DISPlAy
line to be programmed. When the desired line is marked with an arrow, press "ENTER"
button to activate the function. The value to be changed will be set using the "DEC" or
"INC" buttons. In the adjacent display, memory position 1 has been selected by pressing
the "ENTER" button to activate this item.
Operating Instructions
Power Peak ® Twin EQ-BID
If a battery fitted with the BID-System is connected to
OUT 1 or 2 the data stored on the chip will be shown
in the Display. By pressing the "DEC" or "INC" button,
the stored data on the BID Chip/Key may be viewed.
Selecting the "START & EDIT" function, the stored
parameter data on the chip can be changed and the
charge-discharge-process started.(see chapter 9).
Mode
One of the 20 available memory places will be selected
in the "MEMORY VIEW" screen. Additionally, various dif-
ferent parameters may be programmed in this menu. To
highlight a function, press the "ESC" button.
Use the "DEC" and "INC" buttons to select the relevant
Use the "DEC" or "INC" buttons to activate the battery type
column which then enables the following battery types to
be selected:
Nickel-Cadmium battery (NiCd), Nickel-Metal-Hydride
battery (NiMH), Lithium Polymer battery (LiPo), Pb battery
(lead), Lithium Ferrum battery (LiFe), Lithium Ion battery
(LiIo).
12