Herunterladen Inhalt Inhalt Diese Seite drucken

Transport, Packaging And Storage - WIKA 116.18.02-Serie Betriebsanleitung

Druckmessgeräte directdrive-ausführung, miniatur-nenngrößen
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

4. Transport, packaging and storage

4. Transport, packaging and storage
4.1 Transport
Check the instrument and the transport container for any damage that may have been
EN
caused by transport.
Obvious damage must be reported immediately.
CAUTION!
Damage through improper transport
With improper transport, a high level of damage to property can occur.
4.2 Packaging and storage
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g. change in
installation site, sending for repair).
Permissible conditions at the place of storage
Storage temperature: -40 ... +70 °C [-40 ... +158 °F]
Avoid exposure to the following factors
Direct sunlight or proximity to hot objects
Mechanical vibration, mechanical shock (putting it down hard)
Soot, vapour, dust and corrosive gases
Hazardous environments, flammable atmospheres
Store the instrument in its original packaging in a location that fulfils the conditions listed
above. If the original packaging is not available, please contact WIKA.
10
When unloading packed goods upon delivery as well as during internal
transport, proceed carefully and observe the symbols on the packaging.
With internal transport, observe the instructions in chapter 4.2 "Packaging
and storage".
WIKA operating instructions model 116.18.02x

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis