Mpp Tracker 1 - Fronius Galvo Serviceanleitung

MPP Tracker 1

Setting the operating mode on the inverter
Selection options
DC operating mode
Unit
Selection options
MPP AUTO
FIX
MPP USER
Dyn. Peak Manager
for activating or deactivating the dynamic peak managers
Selection options
Fixed voltage
for entering the fixed voltage
Unit
Setting range
MPPT1 initial voltage
for entering the MPPT1 initial voltage
Unit
Setting range
50
DC operating mode / Fixed voltage / MPPT1 initial voltage
-
MPP AUTO / FIX / MPP USER
normal operating status;
the inverter automatically searches for the ideal operating point
for entering a fixed DC voltage at which the inverter will operate
for entering a lower MP voltage above which the inverter will
search for its ideal operating point
ON / OFF
V
120 - 440 (Fronius Galvo)
150 - 800 (Fronius Symo)
V
120 - 440 (Fronius Galvo)
150 - 800 (Fronius Symo)