Ch Cos Φ (P) - Fronius Galvo Serviceanleitung

Ch Cos φ (P) Specification of the power factor cos φ depending on effective power P
The characteristic is defined by max. 4 characteristic points 0 - 1 - 2 - 3.
The coordinates must be entered for the characteristic points on the 0 (x) axis and on the
1 (y) axis.
Characteristic
point
0
1
2
3
Example:
Curve defined by 4 characteristic points
0: P = 15 %, cos φ = +0.85
1: P = 25 %, cos φ = 1
2: P = 45 %, cos φ = 1
3: P = 90 %, cos φ = -0.90
cos φ = +0,85 (cap.)
cos φ = +0,95 (cap.)
cos φ = -0,90 (ind.)
cos φ = -0,85 (ind.)
Example for Fronius Galvo
*
Coordinates
0-0 (x)
0-1 (y)
1-0 (x)
1-1 (y)
2-0 (x)
2-1 (y)
3-0 (x)
3-1 (y)
cos φ
1 (y)
0
1
cos φ = 1
25
Apparent power limit
Setting range
P: 0 - 100 %
cos φ: -0.85 - 1 - +0.85 (Fronius Galvo)
cos φ: -0.7 - 1 - +0.7 (Fronius Symo)
P: 0 - 100 %
cos φ: -0.85 - 1 - +0.85 (Fronius Galvo)
cos φ: -0.7 - 1 - +0.7 (Fronius Symo)
P: 0 - 100 %
cos φ: -0.85 - 1 - +0.85 (Fronius Galvo)
cos φ: -0.7 - 1 - +0.7 (Fronius Symo)
P: 0 - 100 %
cos φ: -0.85 - 1 - +0.85 (Fronius Galvo)
cos φ: -0.7 - 1 - +0.7 (Fronius Symo)
Axis
Characteristic point
*
50
2
75
P [%]
100
0 (x)
3
75