Fronius Galvo Serviceanleitung Seite 66

Ch Cosφ (P) U-LockIn
Ch Cosφ (P) U-LockOut Input of a voltage value; when this voltage value is undershot
Ch Cosφ (P) P-LockOut Input of a power value; when this power value is undershot the
Ch Q (U) *-*
Ch Q (U) TimeC.
Ch Q (U) P-LockIn
Ch Q (U) P-LockOut
Ch Q (U) Cos. φ Min.
Ch Q (P) *-*
Ch Q (P) TimeC.
Ch Q (P) U-LockIn
Ch Q (P) U-LockOut
Ch Q (P) P-LockOut
*-*
IMPORTANT! A detailed explanation of the settings can be found in the "Advanced Grid
Features" section under Reactive Power Mode.
64
Input of a voltage value; when this voltage value is exceeded
the Cosφ (P) characteristic is activated.
80 - 120 %
the Cosφ (P) characteristic is deactivated.
80 - 120 %
Cosφ (P) characteristic is deactivated.
0 - 100 %
Q (U) characteristic:
Relative reactive power specification depending on current ef-
fective power
Specification of a time value in which the relative reactive power
specification depending on the current effective power is trig-
gered
Input of a power value; when this power value is exceeded the
Q (U) characteristic is activated.
0 - 100 %
Input of a power value; when this power value is undershot the
Q (U) characteristic is deactivated.
0 - 100 %
Input of a minimum cos phi value at which the inverter may feed
in power.
0 - 1.0
Q (P) characteristic:
Relative reactive power specification depending on effective
power
Specification of a time value, in which the relative reactive pow-
er specification depending on the effective power is triggered
Input of a voltage value; when this voltage value is exceeded
the Q (P) characteristic is activated.
80 - 120 %
Input of a voltage value; when this voltage value is undershot
the Q (P) characteristic is deactivated.
80 - 120 %
Input of a power value; when this power value is undershot the
Q (P) characteristic is deactivated.
0 - 100 %
0-0 / 0-1 / 1-0 / 1-1 / 2-0 / 2-1 / 3-0 / 3-1 respectively
4 characteristic points 0 / 1 / 2 / 3 with the coordinates 0 (x) and 1 (y)