Resetting Alarms; Resetting Errors - Austroflamm Ben Benutzerhandbuch

77 english

5.1. Resetting alarms

If there is an alarm, the system shows the message in yellow on the screen together with the alarm
description (see the example below).
To close the alarm screen, tap . Closing the alarm screen does not reset the alarm. After tapping
to close the alarm screen, the alarm code is still present in the top left-hand corner of the main
screen as well as on all the idle mode screens (see the example below).
To see the alarm message again, tap the alarm code in the top left-hand corner; in this example,
.
To reset the alarm, you must have eliminated the problem. In this example, you must have
replaced the battery.

5.2. Resetting errors

If there is an error, the system shows the message in yellow on the screen together with the error
description (see the example below).
To close the error screen, tap . Closing the error screen does not reset the alarm. After tapping
to close the error screen, the error code is still present in the top left-hand corner of the main
screen as well as on all the idle mode screens (see the example below).
To see the error message again, tap the error code in the top left-hand corner; in this example,
.
To reset the error, you must have eliminated the problem. Until you have done, the pellet stove is
not ready for operation.