Setting The Week Timer - Austroflamm Ben Benutzerhandbuch

69 english
Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip
this step.
) )
Tap or to increase or decrease the power level. The system saves the changes immediately.
!
NOTE: After starting the pellet stove, we recommend running it for at least 30 minutes at power level 5 /
AUTO. This guarantees that the combustion chamber is clean and that the door glass stays clean for a
relatively long time.

4.7. Setting the week timer

You can setting up to six different time intervals (Ti). It is possible to use a maximum of three time
intervals per day that should not overlap. See the following example:
Table 14 – Time intervals (example)