Trouble Shooting - Respekta CH 22098 IXB Bedienungsanleitung

The power cord must be replaced by a qualified
If your appliance does not seem to operate properly,
DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF.
POSSIBLE CAUSE
• The plug of the appliance is not
connected to the socket.
• The plug has become loose.
• The socket is not supplied with
energy.
• The fuse is switched off.
• ventilation damper blocked.
• motor mounting defective.
• motor defective
• one-way valve is leaky
• connection base chimney-telescopic
chimney is leaky
• motor not properly fixed
• hood not properly fixed
• too much distance hood-hob
• too much draught because of open
doors and/or windows
• mounting rail is not firmly fixed
• screws are not firmly tightened
and authorized professional only.

7. TROUBLE SHOOTING

contact the shop you purchased the appliance at.
MALFUNCTION
The appliance does not work at all.
Light is on but motor does not work.
Abnormal motor-smells.
Smear of oil.
Appliance vibrates.
Insufficient extracting capacity.
Appliance is unstable.
WARNING!
DANGER!
• Check the corresponding socket by
connecting it with another appliance.
• Check the fuse.
• The voltage is too low. Compare the
data on the model plate with the data
of your energy supplier.
• remove blockage.
• replace motor.
• replace motor
• seal the valve
• seal the connection with a suitable
material
• fix motor properly
• fix hood properly
• lower position of hood
• close the doors/windows
• fix mounting rail properly
• tighten the screws
41
MEASURE