Respekta CH 22098 IXB Bedienungsanleitung Seite 37

otherwise you may hurt yourself or damage the appliance.
1. An electrical supply of 220-240V AC / 50 Hz is required.
2. Only connect the appliance to a properly grounded and dedicated socket which
is near the appliance.
3. The appliance must be grounded. The appliance is equipped with a 3-pole
grounding plug. Use a suitable socket to minimize the risk of an electric shock.
4. If the power cord is damaged, it must be replaced by the manufacturer or its
service agent or a similar qualified person in order to avoid any kind of hazard.
5. Check that the technical data of your energy supply meet the values on the
nameplate.
6. Your domestic circuit must be equipped with an automatic circuit breaker.
7. Do not attempt to repair the appliance alone. Repairs carried out by
unauthorized persons can cause serious damage. Always contact the shop you
purchased the appliance at and use original spare parts only.
Do not use a socket board or a multi socket or an extension cord when using
220–240 V/50 Hz alternate current (AC).All electrical connections which may be
damaged must be repaired by a qualified professional.
1. Before you install any carbon filters: switch the appliance off and disconnect it
from the mains.
2. Remove the grease filters.
3. Fix the carbon filters on both sides of the motor housing. Each sid eof the
motor housing is equipped with a plastic filter bracket which has 3 lugs.
must be carried out by at least two persons;
Electrical connection
WARNING!
Carbon filters
37