Respekta CH 22098 IXB Bedienungsanleitung Seite 40

Dry the filters properly before you reinstall them.
Do not touch the illuminant with your hands. The sweat on your fingers will
reduce the operating time of your new illuminant.
1. Replace a defective illuminant immediately.
2. Disconnect the appliance from the mains.
3. Let the illuminant cool down before replacing.
4. Remove the installation-rim of the illuminant by turning it anticlockwise.
5. Take the illuminant off its holder and replace it by a new one of the same kind
and power.
6. Fix the installation-rim by turning it clockwise.
7. The maximum power of the illuminant must not be more than 28W.
Conventional carbon and active carbon filters cannot be cleaned. The capacity
of these filters is limited. You can use such filters for about 3-6 months. Replace a
depleted filter. You can get further information on the filter packaging.
Do not clean the filters in a dishwasher;
otherwise you will damage the filters.
Replacing of the illuminant
Use a thin cloth or a thin glove.
Minimum distance illuminate ↔ any objects/surfaces
e.g. lids, oven covers to avoid any risk of burns by hot
objects/surfaces and to avoid fire hazard.
Only use self shielded illuminants to avoid any risk of
burns by hot objects/surfaces or fire hazard and to
protect yourself from UV-radiation.
Carbon filters
The illuminants as well as all kinds of filters
do not carry a guarantee!
Replacing of the power cord
40