Installation Of The Hood - Respekta CH 22098 IXB Bedienungsanleitung

will then be needed. Equip such an exhaust duct with a condensate trap if need
be.
• Strictly observe the minimum distance between hood and hob.
• Clean the surrounding of the installation area before you install the appliance so
the appliance will not extract any dust or construction waste.
• The exhaust hose must not run in the same exhaust duct as gas tubes, hot air
tubes et cetera.
• Lead away the exhaust hose from the hood as straight as possible.
• The proper maximum bending angle outwards is 120
• Check with a bubble level if the appliance is horizontally positioned while
installing and after having installed it.

Installation of the hood

32
0
.