Appliance Description; Standard Delivery; Accessories - STIEBEL ELTRON DHM 3 Installation

OPERATION

Appliance description

2. Appliance description
2.1

Standard delivery

The following are delivered with the appliance:
- Sieve inside the cold water inlet
- Special aerator "SR"
- Connection hose 3/8, 500 mm long, with gaskets*
- Tee 3/8*
*for the connection as pressure-tested appliance
2.2

Accessories

Special aerator "SR"*
- SR 3: Part number 289591
for DHM 3 and DHM 4
- SR 5: Part number 270582
for DHM 6 and DHM 7
* For use in thread M22/M24.
Pressure-tested tap
- WEH Sensor tap for washbasins
www.stiebel-eltron.com
Non-pressurised taps
- WEN Sensor tap for washbasins
- MAZ Twin lever basin tap
- MAE Mono lever basin tap
ZTA 3/4 - central thermostatic valve
Thermostatic valve for central premixing, for example for operat-
ing an instantaneous water heater with a solar thermal system.
DHM | 21