STIEBEL ELTRON DHM 3 Installation Seite 24

OPERATION
Installation

f Using pliers, break out the knock-out for the power cable f
in the appliance cover. Correct the contours with a file if
necessary.
f Use the appliance back panel as a drilling template. f
f Secure the appliance back panel to the wall with suitable f
rawl plugs and screws.
24 | DHM



f Route the power cable through the cable entry in the back f
panel.
f Hook in the appliance cover with the heater at the bottom. f
f Click the heater into place using the snap fastener. f
f Secure the appliance cover with the cover fixing screws. f

www.stiebel-eltron.com