Adjusting The Water Flow; How To Use; Temperature Setting - clage SMARTRONIC MCX 3 Gebrauchs- Und Montageanleitung

MCX 3..7 SMARTRONIC ®

12. Adjusting the water flow

May only be carried out by a specialist.
Remove the cover (see Fig. 10), undo the hood screw underneath and remove the hood.
Decreasing the flow rate:
EN
Turn the adjusting screw clockwise to decrease the flow rate, thus making a higher outlet
temperature possible.
Increasing the flow rate:
Turn the adjusting screw counter-clockwise to increase the flow rate, thus reducing the pos-
sible outlet temperature.
12
Direction

13. How to use

13

Temperature setting

The touch key
Every key press sets the temperature to the next level:
35 °C 38 °C
Press the key
The current selected temperature is indicated by one of three coloured LEDs.
Tem pe ra ture
Flow
in crease
–
+
allows you to select one of the three preset temperatures.
45 °C (max.)
once again starts the cycle all over.
+
–
28
Three coloured LEDs
Touch key