Gryphon™ D432/D432E Description - Datalogic Gryphon D432 Kurzanleitung

GRYPHON™ D432/D432E DESCRIPTION
The Gryphon™ D432/D432E reader is an omni-directional barcode scanner
having the following characteristics:
Plug and Play
Omni-directional
Operating
Decoding
Formatting and
Concatenating
Imaging
Autoscanning
Flash Memory
Using this Quick Reference Manual, you can start using your
Gryphon™ D432/D432E reader. For details about general configuration
commands, refer to the Gryphon™ D432/D432E Reference Manual
available on the website.
The Gryphon™ D432/D432E is very ergonomic and user-
friendly for intuitive operation and is equipped with plug-
and-play enhanced Multistandard Architecture. It can be
connected to a Host PC through a USB, RS232 or Wedge
emulation cable.
To read a symbol or capture an image, you simply aim the
reader and pull the trigger. Since Gryphon™ D432/D432E
is a powerful omni-directional reader, the orientation of the
symbol is not important.
Thanks to powerful algorithms, Gryphon™ D432/D432E
reliably decodes all major 1D (linear) barcodes, 2D stacked
codes (such as PDF417), 2D matrix symbols (such as
DataMatrix), postal codes (such as POSTNET, PLANET).
The data stream — acquired from decoding a symbol — is
rapidly sent to the host. The reader is immediately available
to read another symbol.
The string of a decoded code may be processed according
to either a simple or advanced data formatting and be
concatenated to other codes (up to 4 different codes).
Gryphon™ D432/D432E can also function as a camera by
capturing entire images or image portions of labels,
signatures, and other items. Two different control modes are
available for managing the camera exposure and calibration.
An autoscan command causes the reader to scan
continuously and to monitor the central zone of its reading
area.
Flash technology allows to upgrade the Gryphon™
D432/D432E reader as new symbologies are supported or
as improved decoding algorithms become available.
GRYPHON™ D432/D432E
1