Indicators; Led Indicators; Good Read Spot; Setup - Datalogic Gryphon D432 Kurzanleitung

DATALOGIC

INDICATORS

LED INDICATORS

The Gryphon™ D432/D432E has one green LED indicator signaling the
following reader functions:
STATUS
Power ON
Power ON with USB (without
external power supply)
Normal Function
BEEPER
The Gryphon™ D432/D432E basic software provides beeper signals for
good/wrong reading and for indicating errors. Its tone, volume and duration can
be directly configured by using the codes given in the Gryphon™ D432/D432E
Reference Manual available on the website.
The application program can also manage the beeper (User Defined Beeper)
when the reader is controlled by a Host PC. It is possible to activate the beeper
by sending a command from the Host to the reader via the current
communication interface.

GOOD READ SPOT

It is possible to enable a green good-read spot, which will be projected in the
field of view when the reading is successful.

SETUP

1. Make connections between Gryphon™ D432/D432E and the Host PC
using the correct interface cable.
2. Read the correct Interface Selection code.
Your reader is now ready to read codes using the default settings.
4
BEHAVIOR
The LED lights up for 2 seconds to signal
the power supply is present.
The LED blinks until the Host accepts the
device.
The LED lights up after a good decoding
and will switch off only at the next trigger
press.