General Information - Hilti DX 860-ENP Bedienungsanleitung

DX 860-ENP powder-actuated fastening tool
It is essential that the operating instructions
are read before the tool is operated for the
first time.
Always keep these operating instructions
together with the tool.
Ensure that the operating instructions
are with the tool when it is given to other
persons.
Parts of the tool
DX 860-ENP powder-actuated fastening tool
Cartridge loading channel
Catch
Base plate
Grip and trigger mechanism
Cartridge strip exit point
Magazine
Carrying handle
Release button
Fastener transport system
Power regulation wheel
Rotating sleeve
Stop piece
Wearing parts
Piston with piston stopper
Piston stopper
Contents

1. General information

2. Description
3. Fasteners, consumables and accessories
4. Technical data
5. Safety precautions
6. Before use
7. Operation
8. Care and maintenance
9. Troubleshooting
10. Disposal
11. Manufacturer's warranty - DX Tools
12. EC declaration of conformity (original)
13. Confirmation of CIP testing
14. Health and safety of the operator
Printed: 08.07.2013 | Doc-Nr: PUB / 5069855 / 000 / 01
1. General information
1.1 Safety notices and their meaning
-DANGER-
Draws attention to imminent danger that could lead to
serious bodily injury or fatality.
-WARNING-
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
-CAUTION-
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
-NOTE-
Draws attention to an instruction or other useful infor-
mation.
1.2 Pictograms
Warning signs
General
warning
Obligation signs
Wear eye Wear a
protection hard hat
The numbers refer to the illustrations. The illustra-
tions can be found on the fold-out cover pages. Keep
Page
these pages open while you read the operating instruc-
15
tions.
16
In these operating instructions, the designation " the
16
tool " always refers to the DX 860-ENP.
17
Location of identification data on the tool
17
The type designation and serial number are printed on
19
the type plate on the tool. Make a note of this informa-
20
tion in your operating instructions and always refer to
21
it when making an enquiry to your Hilti representative
24
or service department.
26
26
Type:
26
27
27
Serial no.:
Warning: explosive
substance
Symbols
Wear ear Wear
protection protective
gloves
DX 860-ENP
en
Warning: hot
surface
Read the
operating
instructions
before use.
15