Wearing Parts; Accessories; Technical Data; Safety Precautions - Hilti DX 860-ENP Bedienungsanleitung

3.2 Cartridges
Ordering designation
6.8/18 M40 black
6.8/18 M40 red
6.8/18 M40 blue

3.3 Wearing parts

Ordering designation
X-76-PS
X-76-P-ENP

3.4 Accessories

Ordering designation
Cleaning set
DX 76 / 860-ENP
I-VO 805 PS
I-VO 808 PS
Ear protectors
Hilti lubricant spray

4. Technical data

Tool
Weight
Dimensions (L × W × H)
Magazine capacity
Contact movement
Contact pressure
Operating/ambient
temp. range
Maximum fastener
driving rate *
* For trouble-free operation
Right of technical changes reserved.

5. Safety precautions

5.1 Basic information concerning safety
In addition to the information relevant to safety given
in each of the sections of these operating instructions,
the following points must be strictly observed at all
times.

5.1.1 Personal safety

a) Stay alert, watch what you are doing and use com-
Printed: 08.07.2013 | Doc-Nr: PUB / 5069855 / 000 / 01
Comments
Extra heavy
(=.27 CAL long, purple)
Extra heavy
(=.27 CAL long, red)
Heavy
(=.27 CAL long, blue)
Comments
Piston stopper
Piston
Comments
Flat brush, 25 mm dia. round brush, 8 mm dia. round brush,
scraper, cleaning cloth
Protective glasses, clear
Protective glasses, tinted
Small
DX 860-ENP powder-actuated fastening tool
970 mm × 320 mm × 145 mm (38.2" × 12.6" × 5.7")
–15 °C to +50 °C (5 °F to 122 °F)
12.02 kg
40 nails/40 cartridges
89 mm (3.5")
approx. 360 N
1000 per hour
mon sense when operating a direct fastening tool.
Do not use tool while tired or under the influence
of drugs, alcohol or medication. A moment of inat-
tention while operating tools may result in serious
personal injury.
b) Avoid unfavorable body positions. Make sure you
work from a safe stance and stay in balance at all
times.
en
17