Herunterladen Inhalt Inhalt Diese Seite drucken

Yamaha AW 2816 Bedienungsanleitung Seite 414

Vorschau ausblenden Andere Handbücher für AW 2816:
Inhaltsverzeichnis

Werbung

MIDI data format
4.13.3.5 Parameter Change (byte operation for
type 0x01:setup memory)
< Reception >
This message is received if [Parameter Change RX] is ON
and the [Rx CH] matches the MIDI channel included in
the Sub Status.
This message will be echoed if [Parameter Change
ECHO] is ON.
When this message is received, the specified parameter
will be controlled.
< Transmission >
This message will be echoed if [Parameter Change
ECHO] is ON.
STATUS
11110000 F0
ID No.
01000011 43
SUB STATUS 0001nnnn 1n
GROUOP ID
00111110 3e
MODEL ID
00000111 07
PARAM TYPE 00000001 01
DATA
0aaaaaaa dd0 address( H) high 7 bits of
0aaaaaaa dd1 address( L) low 7 bits of
0000dddd dd2 data( H) high 4 bits of 8
0000dddd dd3 data( L) low 4 bits of 8
:
:
EOX
11110111 F7
The range of valid addresses is 0x0000 - 0x00ff.
4.13.3.6 Parameter Change (bit operation for type
0x41:setup memory)
< Reception >
This message is received if [Parameter Change RX] is ON
and the [Rx CH] matches the MIDI channel included in
the Sub Status.
This message will be echoed if [Parameter Change
ECHO] is ON.
When this message is received, the specified parameter
will be controlled.
< Transmission >
This message will be echoed if [Parameter Change
ECHO] is ON.
STATUS
11110000 F0
ID No.
01000011 43
SUB STATUS 0001nnnn 1n
GROUOP ID
00111110 3e
MODEL ID
00000111 07
PARAM TYPE 01000001 41
DATA
0aaaaaaa dd0 address( H) high 7 bits of
0aaaaaaa dd1 address( L) low 7 bits of
0ddddddd dd2 data(bit0-2:change bit
:
:
EOX
11110111 F7
The range of valid addresses is 0x0000 - 0x00ff.
412
System Exclusive Message
Manufacturer's ID
No.(YAMAHA)
parameter change or
response
n=0-15(MIDI
Channel No.1-16)
MODEL ID(digital mixer)
Device code (AW2816)
byte operation for system
memory (type)
14 bits address
14 bits address
bits data
bits data
continuous address datas
End Of Exclusive
System Exclusive Message
Manufacturer's ID
No.(YAMAHA)
parameter change or
response
n=0-15(MIDI
Channel No.1-16)
MODEL ID(digital mixer)
Device code (AW2816)
bit operation for system
memory (type)
14 bits address
14 bits address
no.0-7, bit3:0=reset
1=set)
End Of Exclusive
Anhang
4.13.3.7 Parameter Value Request(type 0x00:edit
buffer, 0x01:setup memory)
< Reception >
This message is received if [Parameter Change RX] is ON
and the [Rx CH] matches the MIDI channel included in
the Sub Status.
This message will be echoed if [Parameter Change
ECHO] is ON and this AW2816 unit did not receive the
message.
When this message is received, the value of the specified
parameter will be transmitted as a Parameter Change
Message.
< Transmission >
This message will be echoed if [Parameter Change
ECHO] is ON and this AW2816 unit did not receive the
message.
STATUS
11110000 F0
System Exclusive Message
ID No.
01000011 43
Manufacturer's ID
No.(YAMAHA)
SUB STATUS 0011nnnn 3n
parameter request
15(MIDI Channel No.1-16)
GROUOP ID
00111110 3e
MODEL ID(digital mixer)
MODEL ID
00000111 07
Device code (AW2816)
PARAM TYPE 00tttttt tt
00:edit buffer, 01:system
memory (type)
DATA
0aaaaaaa dd0 address( H) high 7 bits of
14 bits address
0aaaaaaa dd1 address( L) low 7 bits of
14 bits address
0ddddddd dd
count
EOX
11110111 F7
End Of Exclusive
The range of valid addresses is edit buffer 0x0000 -
0x0595 and setup memory 0x0000 - 0x00ff.
4.13.3.8 Parameter Change (type 0x02:function
call)
< Reception >
This message is received if [Parameter Change RX] is ON
and the [Rx CH] matches the MIDI channel included in
the Sub Status.
This message will be echoed if [Parameter Change
ECHO] is ON.
When this message is received, the corresponding mem-
ory or library will be recalled or stored.
< Transmission >
This message will be echoed if [Parameter Change
ECHO] is ON.
STATUS
11110000 F0
System Exclusive Message
ID No.
01000011 43
Manufacturer's ID
No.(YAMAHA)
SUB STATUS 0001nnnn 1n
parameter change
15(MIDI Channel No.1-16)
GROUOP ID
00111110 3e
MODEL ID(digital mixer)
MODEL ID
00000111 07
Device code (AW2816)
PARAM TYPE 00000010 02
function call
DATA
0ddddddd dd0 function
0ddddddd dd1 number
0ddddddd dd2 channel
EOX
11110111 F7
End Of Exclusive
n=0-
n=0-

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis