04/2011
1010567-00
5.8
Instructions for replacing the lamps
The lamp effect decreases over the course of time. As such, the replacement
intervals specified in the maintenance plan must be adhered to.
5.8.1
Low pressure lamps
Replace faulty lamps immediately.
Always replace the entire set of lamps after the specified operating time.
–
Turn 90° and carefully remove from the socket.
–
Push the pins vertically into the socket from above.
–
Turn the lamp 90°.
The lettering must be oriented towards the outside (i.e. towards the user).
Cleaning and maintenance
Operating instructions – 43