Cleaning and maintenance
50
5.16
Cleaning or replacing ambient light
(cabin lighting)
2 effect lamps are located on the rear side of the canopy.
–
If necessary, cover the canopy in order to prevent the paint from being
scratched.
–
Remove the lamps on the rear of the canopy.
Replacing the lamps: see page 43.
Replace the starter: see page 44.
Makrolon tubes (if fitted): see page 44.
The assembly is the same process in reverse order.
5.17
Cleaning the filter in the base
–
Opening the bed base: see page 42.
–
Remove the filter.
–
Cleaning the filter when moist or dry.
Dry cleaning: Vacuum cleaner (depending on the degree of soiling)
Moist cleaning: Use water and detergent or put in a dish-washer