04/2011
1010567-00
5.14
Cleaning or replacing the canopy
accent lighting
2 effect lamps are located in the canopy.
WARNING!
May damage paintwork!
Keep away from lower edge when fitting.
–
Remove the screws.
–
Remove the cover.
Replacing the lamps: see page 43.
Replace the starter: see page 44.
Makrolon tubes (if fitted): see page 44.
The assembly is the same process in reverse order.
5.15
Cleaning or replacing the front panel
accent lighting
–
From the front reach under the front panel and remove the effect lamps.
Replacing the lamps: see page 43.
Replace the starter: see page 44.
Makrolon tubes (if fitted): see page 44.
The assembly is the same process in reverse order.
Cleaning and maintenance
Operating instructions – 49