Clean And Calibrate The Sensor - BEAUTY ANGEL C46 sun Gebrauchsanweisung

04/2011 1010567-00
5.9

Clean and calibrate the sensor

Clean the sensor
NOTE:
Do not spray the sensor directly with detergent.
Always remove the sensor from the station for cleaning.
– Remove the sensor from the base station.
– Clean the sensor housing, measuring window and base station with a
soft, damp cloth.
– Replace the sensor into the base station.
WARNING!
Do not rub with a dry cloth – danger of scratching!
Failure to comply voids any warranty claims.
– For the fast, hygienic and proper cleaning of the sensor
and base station, use specially developed cleaning
agents.
– Concentrated disinfectants or solvents (e.g. Lysoform,
ethyl alcohol or other fluids containing alcohol) must
not be used.
Calibrating the sensor
The sensor must be recalibrated every 30 working days, so that the user's
tanning type can be determined reliably and the lamp output matched to the
tanning type.
Calibration: see separate instructions 'Kalibrieren/Calibration'
(Order No. 1006011-..).
Cleaning and maintenance
Operating instructions – 45