04/2011
1010567-00
The assembly is the same process in reverse order.
When assembling the device please note:
–
Support the canopy panel with one hand so that it does not fall down.
–
Refit and retighten the screws. Refit the middle screws first and then the
outer screws.
5.12
Cleaning or replacing the lamps in the
side section
NOTE:
Do not interchange Beauty Light lamps and UV low pressure
lamps.
For order of the lamps see page 37.
–
Removing the side section panel: see page 41.
Replacing the lamps: see page 43.
The assembly is the same process in reverse order.
Cleaning and maintenance
Operating instructions – 47