Unitest TELARIS 0100-ELEKTROcheck Bedienungsanleitung Seite 85

Loop resistance
Measurement range:
Limit value:
Accuray of limit value:
Test currrent:
Load time:
Mains voltage range:
Nominal mains voltage:
Contact current limit value:
Test time:
Maximum mains voltage fluctuation during the measurement: 1 %
The protective earth conductor must be free of interfering voltage.
RCD-TEST
Nominal fault currents:
Accuracy of nominal fault current:
Type of test current:
Contact current limit value:
Mains voltage range:
Nominal mains voltage:
Maximum mains voltage fluctuation during the measurement: 1 %
The protective earth conductor must be free of interfering voltage.
Contact Voltage/Earth resistance
Test current:
Load time:
Test time:
Accuracy (limit value)
of earth resistance:
Nominal fault current I ΔN
Limit for contact voltage
Measurement range
Limit for earth resistance
Table 2: Limits for earth resistance
0,3...10 Ω
1,5 Ω
+0%, -30%
approx. 1 A
< 80 ms
195...264 V
230 V/240 V
50 ... 60Hz, cos ϕ > 0,95
25V (+0%, -20%)
approx. 3 s
30, 100, 300, 500 mA
+0%, -10%
AC
25 V (+ 0%, -20%)
195...264 V
230 V/240 V
50 ... 60 Hz, cos ϕ > 0,95
1/3 of selcted nominal fault current
< 80 ms
ca. 3 s
+0 %, -30 %
30 mA 100 mA
25 V 25 V
50 ... 1200 Ω 20 ... 360 Ω 5 ... 120 Ω
800 Ω 250 Ω
Technical Data
300 mA 500 mA
25 V 25 V
3 ... 70 Ω
80 Ω 50 Ω
41