Displays / Error Messages; Messages On The Lcd - Unitest TELARIS 0100-ELEKTROcheck Bedienungsanleitung

6.0 Displays / Error Messages

6.1 Messages on the LCD

Measurement
General
General
General
General
General
General
General
Low Impedance
Measurement,
Insulation Resistance
Low Impedance
Measurement,
Insulation Resistance
Display
Displays / Error Messages
Comment/Remark
Test result in order, the limit value has been met.
Test result not correct, the limit value has not been met.
Test currently in process.
The instrument UNITEST 0100-ELECTROcheck is
ready for operation.
Batteries are nearly discharged and must be replaced.
The measurement results no longer meet the specifi-
cations
Batteries are discharged; the instrument operation is
no longer possible. The instrument will shut down in a
few moments.
The instrument is overheated; the mains internal resis-
tance test, the loop resistance test or the RCD test can-
not be performed.
A voltage is present at the sockets, therefore the test
cannot be carried out.
An integrated fuse is defective and must be
replaced.
31