ZANKER KDT 10032FK Benutzerinformation Seite 6

RESET function
Press and hold simultaneously
With this function you can cancel the running programme or the delay start.
User mode
Press and hold simultaneously
In user mode can be changed:
• The level of the water softener according to the water hardness.
• The activation or the deactivation of the acoustic signal for end of programme.
• The deactivation of the rinse aid dispenser when you want to use the Multitab option without rinse aid.
• The level of rinse aid according to the required dosage.
These settings will be saved until you change them again.
Adjusting the water softener
While the appliance is in user mode:
1. Press .
• The indicators
• The indicator
• The indicator starts to flash. The number of flashes indicates the level (E.g. 5 flashes + pause + 5
flashes = level 5).
6
and until the appliance is in programme selection mode.
and until the indicators
, and go off.
continues to flash.
,
5x
, and start to flash.
6x