ZANKER KDT 10032FK Benutzerinformation Seite 10

Adding MULTI-TABLETS
The AUTO OFF function
This function decreases energy consumption by deactivating automatically the appliance when it is not operating.
The function comes into operation:
• 5 minutes after the completion of the programme.
• After 5 minutes if the programme has not started.
Starting a programme
1. Keep the appliance door ajar.
2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode.
3. Press the button related to the programme you want to start. The related programme indicator comes on.
4. Close the appliance door to start the programme.
Option delay
1. Set the programme.
2. Press again and again until the indicator related to the number of hours want to set comes on (3 o 6). The
delay indicator comes on.
3. Close the appliance door to start the countdown.
When the countdown is completed, the programme starts.
10
1
2