Electrolux EOC69900 Benutzerinformation Seite 14

14 electrolux
set temperature, the appliance deactivates
automatically.
There are two temperatures to be set
• The oven temperature
• The core temperature of the food
The display shows the oven temperature
and the core temperature of the food.
1 2
1 Heating function
2 Food probe indicator
3 The core temperature of the food
4 The set core temperature of the food
5 The set temperature in the appliance
6 The temperature in the appliance
When the appliance operates at the set
temperature, the current temperatures
go off.
Important! Only use the supplied food
probe and the original spare parts.
1. Activate the appliance.
2. Put the tip of the food probe in the cen-
tre of the food.
3. Put the plug of the food probe in the
socket on the side wall of the appliance.
The display shows the menu Food
probe .
If you do step 2 before step 1, touch
or to set the menu Food probe .
4. Touch
or
ture of the food in less than 5 seconds.
5. Go to the menu Functions .
6. Touch
or
tion and, if necessary, the oven temper-
ature.
The food probe must stay in the food
and in the food probe socket during
the cooking.
3 4
6 5
to set the core tempera-
to set the heating func-
7. When the food is at the set core tem-
perature, an acoustic signal sounds.
The heating function deactivates.
Touch one of the sensor fields to stop
the signal.
Warning! Be careful when you remove
the tip and plug of the food probe. The
food probe is hot. There is the risk of
burns.
8. Remove the food probe plug and re-
move the food from the appliance.
9. Deactivate the appliance.
For meat programmes with the food
probe, refer to the menu Recipes .
Telescopic runners
Installing telescopic runners
You can put the telescopic runners on each
level.
Make sure that the two telescopic runners
are on the same level.
The stop element that is at one end of the
telescopic runner must point up.
1
2