Write File To Stg Ram; Read Directory From Mds (Read Dir From Tag); Read Directory From Stg Ram (Read Dir From Stg Ram) - Siemens MOBY STG Handbuch

R 06.07
5.4.4

Write File to STG RAM

When a file is saved, the file name indicated in the editor is also indicated as
the default name. You can still change the file name before saving the file. The
file name may contain up to 8 characters. When the file is saved, the file exten-
sion .HEX is automatically added to the file name.
5.4.5

Read Directory from MDS (Read Dir from Tag)

The file directory of an MDS is read and indicated on the display in the directory
view (see chap. 5.3.2). With some MDS types, this may take several seconds.
5.4.6 Read Directory from STG RAM (Read Dir from STG
RAM)
The file directory of the hand-held terminal's RAM (drive M:) is read and indi-
cated on the display in the directory view (see chap. 5.3.2). Only type *.HEX
files are shown on the display. Also, only files located in the root directory of
the hand-held terminal's RAM are indicated on the display.
STG Hand-Held Terminal
(5)J31069-D0126-U001-A5.2-7418
The "FILEHANDLER" Program
E-43