Expanded Functions; Storing The Mds Data On The Hand-Held Terminal - Siemens MOBY STG Handbuch

Expanded Functions

6 Expanded Functions
6.1 Storing the MDS Data on the Hand-Held
Terminal
The data read from the MDS are automatically stored on the hand-held terminal
in a file named "READ_D.HEX," "READ_E.HEX," "READ_F.HEX,"
"READ_I.HEX" or "READ_U.HEX" on the "RAMDRIVE" drive of the PSION.
Every additional read command overwrites this file.
When the MDS is write-accessed, the write data are written from the editor to
the MDS and also to the "RAMDRIVE (M:)" drive of the PSION under the name
"WRITE_D.HEX," "WRITE_E.HEX," "WRITE_F.HEX," "WRITE_I.HEX" or
"WRITE_U.HEX." Every additional write command overwrites this file.
The "file/load file" function shows all files with the file extension ".HEX." You
can select one of them with the cursor keys. This file is then loaded to the edi-
tor. There is no storage under the name READ_x.HEX or WRITE_x.HEX.
The "file/save" function stores the data of the editor in a file with the file exten-
sion ".HEX" and at the same time the ID number in a file with the file suffix
".HX1" on the RAMDRIVE drive of the PSION (i.e., drive M:). You can specify
any name of 1 to 8 alphanumeric characters.
Note
When you read data from the MDS, modify data in the editor and
then save the data, the modified data will be stored in the .HEX file.
E-52
STG Hand-Held Terminal
(5)J31069-D0126-U001-A5.2-7418
R 06.07