Data Editor - Siemens MOBY STG Handbuch

R 06.07
4.1

Data Editor

The MDS data can be edited in hexadecimal or ASCII in the editor screen. This
can be set in the EDITOR/DISPLAY menu.
STG Hand-Held Terminal
(5)J31069-D0126-U001-A5.2-7418
The "MOBY D/E/F/I/U" Programs
The editor always shows the total size of
an MDS memory. Use the cursor func-
tions to access the individual addresses.
Use the "Tab" key to jump to any ad-
dress. See chapter 4.4.1.
Indication of the currently set read head.
Cf. chapter 4.5.1
The TagId of the MDS is only displayed
on the MOBY E/F/D/U. It is valid after
the "MDS/read-write-readTagId" function
is executed.
Date field:
The date on which the cursor is located
can also be shown in hexadecimal,
decimal, ASCII or binary format. The
"Editor/edit date" function can be used to
change the value in the date field.
The editor screen contains the MDS date.
Standard setting is 32 bytes.
MDS addresses are shown in hexadeci-
mal or decimal format.
E-19