Siemens MOBY STG Handbuch Seite 84

Appendix
The MOBY F Library
Function Call
proloc_ReadBlock
proloc_ReadPage
proloc_WriteBlock
proloc_WritePage
proloc_GetSnr
nGetTagType
nMobyFOpen
vMobyFClose
The MOBY I Library (normal addressing of MDS)
Function Call
moby_init
moby_read
moby_write
moby_reset
moby_status
nMobyIOpen
vMobyIClose
nMobyIReadStartProtocol
E-78
Short Description
Reads a block from the MDS (16 bytes)
Reads a page from the MDS (4 bytes)
Writes a block to the MDS (16 bytes)
Writes a page to the MDS (4 bytes)
Reads the TagId from the MDS
Determines the type of MDS in the antenna field
Opens a serial interface in PSION
Closes the opened interface
Short Description
Initializes an MDS with a filler character from ad-
dress 0 to the end address
Reads a data block from the MDS
Writes a data block to the MDS
Sends a reset command with parameterization
to the read head
Sends a status command to the read head
Opens the interface and turns on the read head
Closes the opened interface. The read head is
turned off.
Reads the startup telegram from the read head
(5)J31069-D0126-U001-A5.2-7418
R 06.07
STG Hand-Held Terminal