Siemens MOBY STG Handbuch Seite 26

The "MOBY D/E/F/I/U" Programs
The "current area"
Current area
The current area is changed automatically when you edit data and overwrite.
The size of the memory area shown on the display can be switched
with the EDITOR/DISPLAY function. See chapter 4.4.2.
E-20
The editor uses normal representation
for the "current area." All other data
areas of the MDS are shown inverted.
The current area shows the data block
which was read last. During read/write-
accesses, the current area is entered as
the value for the write command.
This value can be adjusted in the
TAG/WRITE or TAG/READ menu.
In the normal representation, 32 bytes
are displayed in lower case letters. This
gives you an overview of the MDS data.
In zoom representation, only 4 consecu-
tive bytes are shown. Representation is
in upper case letters. This display is
easy to read.
Zoom representation (hexadezimal)
Zoom representation (ASCII)
STG Hand-Held Terminal
(5)J31069-D0126-U001-A5.2-7418
R 06.07