Siemens MOBY STG Handbuch Seite 83

R 06.07
The tables below provide a summary of implemented commands.
The MOBY E Library
Function Call
CCT_READ_N_BLOCK
CCT_WRITE_N_BLOCK
CCT_WRITE_SIGNAL
CCT_OFF
CCT_MODE
CCT_OPEN
CCT_CLOSE
CCT_SETKEY
CCT_SET_KEY_TEMP
CCT_GET_FIELD_STATE Scan current card indices
CCT_RESET
Although the commands of the MOBY E library are the same as those of the
standard MOBY E library "CCTWAPI," not all commands of "CCTWAPI" are
available on the hand-held terminal.
STG Hand-Held Terminal
(5)J31069-D0126-U001-A5.2-7418
Short Description
Read card data (1 to n data
blocks, max. of 96 bytes)
Write card data (1 to n data
blocks, max. of 96 bytes)
Address digital output, re-
served for switching the
antenna
Turn off antenna field
Set field mode of the
antenna field
Open logical device
Close logical device
Parameterize read-card/
write-card interface
Change temporary key
Reset read head
Appendix
Type of Command
Standard
Standard
Standard
Standard
Standard
Only for
SIM operation
via RS 232
Only for
SIM operation
via RS 232
Optional
Optional
Optional
Optional -
general command
E-77