Siemens MOBY STG Handbuch Seite 61

R 06.07
The length of the READ or WRITE file is the same as that of the MDS which
was read.
READ_D.HEX:
112 bytes for I-Code SLI
256 bytes for Tag-it HF-I
1000 bytes for my-d
READ_E.HEX: 768 bytes for MOBY E (in normal mode)
1024 bytes for MOBY E (after reading the raw data)
1024 bytes for MOBY E (in SIM mode)
READ_F.HEX:
192 bytes for MOBY F (after reading an F4xx MDS)
256 bytes for MOBY F (after reading the raw data of an
READ_I.HEX:
READ_U.HEX:
The contents of the file can now be indicated and changed with an appropriate
editor on your PC.
When ASCII data were read from the MDS:
Any editor can be used (e.g., NOTEPAD, WRITE, WORD and so on).
When binary data were exchanged with the MDS:
Use a HEX editor. HEX editors are available on the shareware market
(e.g., Hedit and so on) or on the professional market (e.g., Codewright).
After concluding your session with PsiWin, the remote-link connection should
be disconnected again.
To restart the STG application, see chapter 6.7.
Before starting a new session with PsiWin, the STG application should be ex-
ited.
STG Hand-Held Terminal
(5)J31069-D0126-U001-A5.2-7418
44 bytes for I-Code1
5 bytes for MOBY F (after reading an F1xx MDS)
Setup Setting
62 bytes
128 bytes
2 KB
8 KB
32 KB
Setup Setting
2 KB
32 KB
Expanded Functions
F4xx MDS)
No ECC
62
128
2045
8189
32765
2048
32768
With ECC
42
112
1778
7154
28658
E-55