Cleaning And Maintenance - Atag OX6211P Bedienungsanleitung

Cleaning and Maintenance

78 ATAG
Before cleaning switch the oven off and
let it cool down.
The appliance must not be cleaned with
a superheated steam cleaner or a
steam jet cleaner.
The oven should be kept clean at all
times. A build-up of fats or other
foodstuffs could result in a fire,
especially in the grill pan.
Important: Before carrying out any cleaning
operation, the appliance must be disconnected
from the power supply.
To ensure a long life for your appliance, it is
necessary to perform the following cleaning
operations regularly:
- Only perform when the oven has cooled down.
- Clean the enamelled parts with soapy water.
- Do not use abrasive cleaners.
- Dry the stainless steel parts and glass with a
soft cloth.
- If there are stubborn stains, use commercially
available for stainless steel or warm vinegar.
The oven's enamel is extremely durable and highly
impermeable. The action of hot fruit acids (from
lemons, plums or similar) can however leave
permanent, dull, rough marks on the surface of
the enamel. However such marks in the brightly
polished surface of the enamel does not affect the
operation of the oven. Clean the oven thoroughly
after every use. This is the easiest way to clean
dirt off. It prevents dirt being burnt on.
Cleaning materials
Before using any cleaning materials on your oven,
check that they are suitable and that their use is
recommended by the manufacturer. Cleaners that
contain bleach should NOT be used as they may
dull the surface finishes. Harsh abrasives should
also be avoided.