Terminal Block; Service And Spare Parts - Atag OX6211P Bedienungsanleitung

Service and spare parts

86 ATAG
The following types of mains cable are suitable,
taking the necessary rated cross section into
account: H07 RN-F, H05 RN-F, H05 RR-F, H05
VV-F, H05 V2V2-F (T90), H05 BB-F.
The connection cable must in any case be laid
out so that at no point does it reach 50°C (over
room temperature).
After the connection has been carried out, the
heating elements must be tested by being
operated for about 3 minutes.

Terminal block

The oven is fitted with an easily accessible terminal
block which is designed to operate with a single-
phase power supply of 230 V.
Letter L -
Letter N -
or E -
If after the checks listed in the chapter "If
something is wrong", the appliance still does not
work correctly, contact your local Service Centre,
specifying the type of malfunctioning, the
appliance model (Mod.), the product number
(Prod. No.) and the serial number (Ser. No.)
marked on the identification plate. This plate is
placed on the front external edge of the oven
cavity.
Original spare parts, certified by the product
manufacturer, are only available at authorised
spare parts shops.
Live terminal
Neutral terminal
Earth terminal