Control Knobs; Safety Thermostat - Atag OX6211P Bedienungsanleitung

Control knobs

50 ATAG
The FUNCTIONS control knob
The cooking functions can be setted turning this
knob on or
The TEMPERATURE / TIME control knob
The temperature and the cooking time can be
setted turning this knob on

Safety thermostat

To prevent dangerous overheating (through incorrect
use of the appliance or defective components), the
oven is fitted with a safety thermostat, which interrupts
the power supply. The oven switches back on again
automatically, when the temperature drops.
Should the safety thermostat trigger due to incorrect
use of the appliance, it is enough to remedy the error
after the oven has cooled down; if on the other hand,
the thermostat triggers because of a defective
component, please contact Customer Service.
The cooling fan
The oven is provided with a cooling fan, meant to
keep the front panel, the knobs and the oven door
handle cool.The fan switches on automatically after
a few minutes of cooking. Warm air is blown out
through the aperture above the oven door.
When the oven is switched off, the fan may run on
after the oven is switched off to keep the controls
cool. This is quite normal.
The action of the cooling fan will depend on how
long the oven has been used and at what
temperature. It may not switch in at all at lower
temperature settings nor run on where the oven has
only been used for a short time.
position.
or position.